Electrical & Electronic Enclosures
An enclosure should fit the equipment, not the other way around. Infitra manufactures custom metal cabinets, panel boxes and equipment housings for industrial applications.
Electrical, electronic & outdoor enclosures: choose the complete specification
Electrical Control Panel Boxes
Wall-mounted or floor-standing metal housings for control, automation and electrical equipment. Mechanical enclosure supply and any electrical assembly/testing scope must be specified separately.
Specify: Equipment layout, mounting plate, cable/gland entries, door arrangement, earthing studs, service clearances and heat dissipation.
Outdoor Equipment Cabinets
Custom housings for outdoor equipment, distribution and utility installations, with design choices driven by rain exposure, dust, corrosion, solar heating and access requirements.
Specify: Requested IP target, canopy/plinth, cable entries, gasket, lock, hinges, drainage/condensation strategy, ventilation or cooling and site mounting.
Electronic, IT & Instrument Enclosures
Equipment-specific housings for electronics, instrumentation, telecom and integration projects. Rack-mounted or standalone arrangements can be reviewed against the actual components.
Specify: PCB/equipment mountings, cut-outs, connector positions, service access, airflow, cable segregation and any separately specified EMC requirements.
Junction & Distribution Boxes
Compact boxes with hinged or screw-fastened covers for agreed connection and equipment layouts. Configure removable gland plates, internal mounting points and labels to the project.
Specify: H × W × D, material and thickness, entries, mounting plate/DIN rail provisions, cover type, gasket and protection requirements.
Material and finish options
| Material / finish | Selection considerations |
|---|---|
| Powder-coated CRCA / mild steel | Specify sheet thickness, pretreatment, colour/RAL, coating thickness and indoor/outdoor coating requirements. |
| Pre-galvanised GI or specified galvanised construction | Agree zinc coating, welded/cut-edge treatment, finish compatibility and corrosion exposure. |
| Stainless steel 202, 304 or 316 — by approved specification | Confirm exact grade and surface finish. Grade selection depends on moisture, cleaning chemicals and chlorides; these grades are not interchangeable. |
IP protection: specify a target, verify the finished configuration
The IP code describes tested protection against solids and water under IEC 60529. It is not a general corrosion, electrical safety, explosion-proof or thermal rating. Open vents, fans, cable glands, hinges, door seals and site modifications affect the completed enclosure.
| Requested IP target | General meaning / selection note |
|---|---|
| IP45 | Protection against solid objects of 1 mm and larger, and water jets; not a dust-tight claim. |
| IP54 / IP55 | Dust-protected construction; splash protection / water-jet protection respectively. |
| IP65 / IP66 | Dust-tight construction; water jets / powerful water jets respectively. |
| IP67 / IP68 | Temporary immersion / immersion under specified agreed conditions. These are specialised targets and do not automatically imply water-jet protection. |
Important: Do not treat this range of requested IP targets as certification of every Infitra enclosure. The required rating, complete configuration, test method and supporting report must be agreed and verified before a rated claim is made. IP67/IP68 feasibility is subject to a specific design review; hazardous-area requirements need a separate certified solution.
Configuration checklist
Overall and usable internal dimensions; equipment heat load; mounting plate; wall brackets or floor plinth; hinged or removable doors; detachable panels; gasket material; hinges; cam/multi-point locks; cable glands/entries; earthing points; ventilation; filters/fans; lifting and access provisions; finish and labels.
How to choose the enclosure
- Identify the equipment, component layout, maintenance clearances and future additions.
- Describe the actual indoor/outdoor environment: dust, rain, washdown, chemicals, sunlight and temperature.
- Agree material, corrosion protection and required IP target.
- Coordinate cooling with ingress protection; an unprotected vent can defeat the required seal.
- Approve drawings, accessories, cut-outs and any test/documentation requirements before production.
For a quote, send drawings or H × W × D, quantity, material/grade, thickness, requested IP target, accessories, equipment/application details, delivery location and timeline.
Discuss a custom enclosure ↗ View Server, Network & Data Racks ↗
Applications & project planning.
From Faridabad, our priority network covers Delhi-NCR, Gurugram, Manesar, Noida, Greater Noida, Palwal, Bawal, Mathura and Kosi Kalan. Wider North India and Pan-India supply is planned around the order scope and delivery requirements.
Experience behind
every manufacturing brief.
SRG International Pvt. Ltd. combines in-house laser cutting, CNC punching, CNC bending, fabrication and powder-coating capability with application-led project discussion.
We agree the product configuration, scope, finish and delivery requirements before moving into manufacture.
Meet your manufacturing partner ↗Let’s build the right solution.
Send your drawing, dimensions, quantity and project location.